| |
5 of 9 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRobert from Escondido CA
Rusty racks
Was discouraged seeing rust on both upper and lower racks. Remebered prior dishwasher and $300+ estimate for the racks. But the rusty parts were only some of the small moveable parts of the rack. Each one just snapped out, and the replacement snapped in. No tools at all. Five minutes and $55 later the racks looked new.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerA. Scott from Coronado CA
There was rusting on several pieces on the lower rack of the dishwasher.
Using the PartsSelect website, I was able to easily identify and order the parts necessary. The parts that arrived were an exact match, which made the replacement quick and easy. The pieces were held in place by a plastic snap on clip. Direct pressure on the clip released the part, as per design, and the replacements parts required equal pressure to insert. The parts fit as well as the original items, which made the time of actual repair less than five minutes.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerVincent from Norwood PA
The tines on the dish racks on the lower rack started to rust and some of the tines fell off.
The tines simply clipped on and off so it was easy as clipping the new ones in place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDebra from Eden Prairie MN
Tine rusted out and broke in two pieces.
Pulled off the old tine and replaced with a new one. Now I can add dishes without them falling over in the wash cycle. Very easy to do.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
Tools
CustomerRichard from Tampa FL
|