Bake Element

PartSelect Number PS2081227

This is an electric oven bake element with female spade connections.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Element will not heat.
  • Compare At

    $53.38
  • You Save

    $8.90
  • Your Price

    $44.48
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 25 reviews What's this?
1-5 of 25
 

52 of 76 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJim from Placentia, CA

Oven (not broiler) element burned out, no oven heat

Inside the oven, I removed one Phillips screw on each side where the element mounts to the back oven wall. Then disconnected the wire on each side using pliers. Unscrewed glass lens, unscrewed light bulb. Replaced all pieces in reverse order. Took less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMark from Conway, AR

Main burner element got a hot spot and burned through

VERY SIMPLE. Two screws inside the overn hold the element in place, remove them - pull the element forwad to expose the connections, one on each end. Simply unplug the element from the connections to remove the old one, plug the new element into the connections, push the element back into place, and re connect the two screw's that hold it in place. That's it. 5 minutes tops. You guys were great as far as getting the part, quickly and easily. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 7 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Harpers Ferry, WV

The bake element broke in two pieces

removed the 2 screws connecting the element to the back wall of the oven. then slid the element towards me about 3 inches, and that exposed the wires ,which were terminated on to the element. I pulled the wires off the element, and removed it. I placed the new element in the oven,terminated the wires by pushing the connectors on to the element, slid the element towards the back of the oven , pushing the wire connections into the rear wall, until the attached flange ,on the element rested against the wall. I then terminated the screws to hold the element in place. Turned on the oven and made some biscuits. All went well

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJulie from Boerne, TN

Bake element melted

unscrewed back plate (one screw each side) pulled gently to expose connections. NOTE: BIG MISTAKE - forgot to shut off power!!!! I blew the clock which now needs to be replaced (in process). Back to the element though - connections very easy. One side had to be pulled from behind (used needle nose plyers to pull through opening). Connected element both sides gently pushed back in to position and replaced screws. I'll let you know how the clock replacement goes!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Bake Element

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerChristopher from San Fransisco, CA

The old element snapped, crackled and popped after years of relentless use-and-abuse.

Here's the way to do it, according to the "Describe how you did the repair" prompt: "First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires..."

Right, however, I shoulda-woulda-coulda listened to my fellow DYI'ers on this site about c-a-r-e-f-u-l-l-y feeding the wiring out of the rear hole.

But, first, turn off the power. Secondly, make sure the power is off at the breaker. I did and that worked fine.

However, as I pulled the connecting end of the bake element out, bummer! The spade electrical fitting popped off and retreated into a sea of insulation! Future solution? Like The Man suggested, Carefully, gently pull the element out and grab the connecting wire, pull it out to get a little slack and attach a clothespin to the end, so it won't back out and disappear! Then, detach the broken element, reverse the steps with the new bad boy and start cookin'!

If you need to pull the stove out, as we did, to "get at" the back of the oven and the retreated wire, move the oven out on a parallel height platform or boards as it exits the opening. Note carefully as to how much slack there is on the electrical connection, typically armored cable or another, er, "homebrew" electrical solution.

Take your time, as the pie will wait.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 25