Door Shelf Retainer Bar - Cut-to-Fit

PartSelect Number PS2076166

This part may need to be cut-to-fit if it's too long for your appliance.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $38.68
  • You Save

    $6.45
  • Your Price

    $32.23
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 9 reviews What's this?
1-9 of 9
 

8 of 8 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar - Cut-to-Fit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBettyJo from Culpeper VA

Door shelf retainer bars were broken

I received the door shelf bars. They were 26 inches. I used a hack saw and cut them to 22 inches. Put them on.
Perfect fit!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar - Cut-to-Fit

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers

CustomerVersa J from Roseburg OR

The previous one was broken

had to cut approximately 1/2 inch off. It was a bit to thick used the pliers to squeeze it to a thickness it would fit in the slots

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar - Cut-to-Fit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerNeill from Albuquerque NM

Retainer bar was missing.

I had to cut the bar to the right length with a hacksaw. The most difficult part was getting on the plastic supports/pins on either end. I'm not sure a hacksaw is the best way to cut a retainer bar, but it worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

Tools

Customerfrancis from longmont CO

Missing door shelf retainer

ordered new retained and fastners
cut to length per instructions
installed
repair completed
thanks for your service all parts were correct and deliver on time

wayne winkler

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar - Cut-to-Fit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDARYL from MANDEVILLE LA

Door shelf retainer bar replacement.

The firt hard thing was waiting for the part to arrive, but that went quick. The second hardest part was opening the box. Shucks I got a paper cut, should have used a razor but while wife wont let me have sharp objects. Oh, yeah I had to find the hachsaw. I fooled everyone I knew where that was too. Be sure to measure properly, because if you cut too short then you have to stretch the bar. I havn't found any type of bar stretcher that works. It's best if you clamp the metal bar to a 2 X 4 piece of wood in order to steady the metal bar while you cut. You can't cut to well trying to hold the metal bar in your hand. The best part was completeing the job by installing the bars. Finally I have more room in my freezer to store food in the doors. This is my story and I am sticking to it. Have fun.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerIsidoro from Tiburon CA

Replace missing parts

fast and easy. I got the right parts from the begining.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerAlan from Saco ME

Cut to size and installed

I simply measured for the correcy length, cut with a hacksaw, inserted the ends that attach it to the door and installed it on the door ..... simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerlane from silver spring MD

Broken bits

nothing exciting - I cut the retaining bar to the correct length, inserted the clips in the bar and pushed them in the holes - voilia, new bar in place.

The temp control discs were the same, push in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar - Cut-to-Fit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSusan A. from Marshfield MA

Retainer bar needed replacement

had it done by my husband, I did not do it

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-9 of 9