Quick Question!

Have you ever purchased from PartSelect.com before?

11743092-1-S-Whirlpool-WP60100-1-Kickplate Clip
11743092-1-S-Whirlpool-WP60100-1-Kickplate Clip 11743092-2-S-Whirlpool-WP60100-1-Kickplate Clip 11743092-3-S-Whirlpool-WP60100-1-Kickplate Clip http://www.partselect.com/Schematics/Maytag/42934.gif

Kickplate Clip

PartSelect Number PS11743092

This kickplate clip is an inch long and is made of metal. Two are needed per refrigerator.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$9.12

You Save

$1.52

Your Price

$7.60
Order within the next 3 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 4 people found this instruction helpful

Parts Used:
  • Kickplate Clip
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers, Socket set
Customer: Paul from Fort Wayne, IN

Kickplate clip broke off

Reattaching the kickplate clip was easy, but the tab that holds in place was broken. It would slide back when the kickplate was installed. I fashioned a replacement tab out of a piece of 3/32 aluminum bent into a U with the hammer. To hold it in place I drilled and tapped one hole and used a 6-32 machine screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
  • Kickplate Clip
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Gaylon from Auburndale, FL

Missing clips

I had to find a couple screws that would match the clips and kickplate. I screwed on the clips. The kickplate snapped on perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: lane from silver spring, MD

Broken bits

nothing exciting - I cut the retaining bar to the correct length, inserted the clips in the bar and pushed them in the holes - voilia, new bar in place.

The temp control discs were the same, push in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3