Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
October 30, 2023
How do I remove this cover to get to the LED modules inside. I have removed the LED cover, but the wire leads are not accessible.
For model number W11483116
Hi Tim, thank you for reaching out. To access the wires of the light module, we have found the instructions. These may not be of the same model but will help you to access the wires. You may need to follow these steps:
The light module has two locking tabs on the front side that you'll need to depress.
1. Insert a putty knife between the light module and the compartment liner to remove the light module .
2. Depress the locking tabs and rotate the light out, then disconnect the electrical connector.
3. You may need to use a tool to depress.
4. Reconnect the electrical connector by aligning and pushing until it snaps back in place.
5. Tuck the wires into the opening position, the light with the led strip facing out.
6. Press the light module until it snaps into place.
We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.