Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
February 21, 2020
I replaced my pump 23 jan 19. I am once again getting the f1e1 code. (ccu failure) unplugged overnight & plugged back in ran a wash (@ 45 minutes left if went click as if the drain pump started then quit) f1e1 on display.Ran diagnostics, cleared codes, unplugged for the 15 second plugged back tried to wash again (@ 45 minutes same thing)
For model number wfw9351yw00
Hi Donald, thank you for your question. That would generally mean that you would have to replace your control board. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
March 28, 2024
On the final drain cycle of the wash my machine doesn't spin and it's supposed to. The machine does spin/ agitate during the wash cycles. Would it be the control board?
For model number YWFW9351YL00
Hello Brian, thank you for your question. There may be an easy fix for this issue on your GE. On some, all you need to do is unplug the machine for 1-2 minutes. Then plug it back in and open and close the lid 6 times. This action should reset the unit. If that is does not work, you can try replacing the Belt PS11746258 as it may be worn. We We also have a video for you to view for installation information. We hope to hear from you soon.
