Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
February 13, 2018
My dishwasher is not draining and i have taken it apart up to the impeller. The impeller doesn’t seem to come off the shaft. Do i have to pry off or pull with channel locks ? Also what am i looking for to tell if the impeller needs replacing? Thank-you. Also, i have replaced the water control level switch.
For model number DWU8260AAX
Hello Joe, thank you for your question. To remove the impeller, the inner bottom spray arm should be removed. Once that is out, the pump cover, housing and filter can be removed. The impeller is held into place by a small screw. If the impeller is cracked, or pieces broken out of it, it would have to be replaced. This video might help you with your repair. https://www.youtube.com/watch?v=51VysEmz2qg
I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
