Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DWU4915AAX

DWU4915AAX Maytag Dishwasher - Overview

Get Parts and Repair Help for DWU4915AAX

If you know the dishwasher repair part you need, you can browse the list of all parts on the DWU4915AAX, or you can search by name or part description. You can also find your part by where it is located on the DWU4915AAX by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for DWU4915AAX parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$34.24

Door Switches and Holder Assembly

This part senses when the door is closed so the cycle can start.

$187.48

Upper Dishrack with Wheels

This rack comes complete with four attached wheels and the rack may differ in appearance, but will function same as original part.

$7.60

Soap Cup Door Latch and Gasket

Please Note: A bad gasket is one of the causes for a door leak.

$5.38

Actuator Lever

$21.48

Motor Shaft Seal

This seal has a rubber exterior and a metal interior.

$7.05

Actuator Lever Pivot Pin

$4.79

SCREW

Sold Individually.

$29.72

Lower Wash Arm Support and O-Ring Gasket Kit

This kit contains a lower wash arm support and an o-ring gasket.

Lower Spray Arm Seal

$10.01

CONNECTOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bottom rack needed replacing

  • Customer: Cheryl from South Burlington, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 507 of 526 people found this instruction helpful
Just took it out of the box and slid it in.
Only problem I encountered, and I think it was due to the age of the dishwasher, was the newunit was not as deep as teh original rack. This will require a new method of loading dishes. Also, the new basket doesn't really fit well in the new rack.
Still cheaper than replacing a good cleaning dishwasher! read more

Rack roller broke

  • Customer: Kathy from Lombard, IL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 481 of 482 people found this instruction helpful
I opened the end stop of the rack, replaced the roller, and put the end stop back on. I can't believe I paid the repairman the last time $125????? An he put in a regular screw that rusted and broke the roller. Took me 3 minutes! Thanks read more

The dish rack had two sets of adjustable tines that had never worked.

  • Customer: frank from kenmore, WA
  • Difficulty: Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 477 of 481 people found this instruction helpful
I ordered two clips just in case. Turns out I needed both of them. Since I hadn't seen the adjustable tines installed, it took some time to figure out how to put the assembly together.

For some reason I had the dishwasher for 7 years before it occurred to me to order the replacement parts. It's much more efficient to use with the adjustable tin... read more