Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Damage to the plastic tub.
The clips that hold the tub halves together were difficult to reinstall. I realized once I got it apart that the damage was probably a secondary condition. The primary problem was that the drum was off center due to a failing bearing. It is only sold with the rear tub assembly. $475.Live and learn. My new LG washer is pretty slick though.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marnie
February 27, 2018
Every time the washer is spinning it is made a loud sound. After the load finished, i saw shredded gray matter that looked like it had thread running through it. I tool out the clothes and looked behind the rubber flap around the inside dryer and it looks like a gasket is missing that should fit there somewhere. If i buy the gasket and it is not the right part, can i return it?
For model number GHW9400PL0
Hello Marnie, thank you for your question. It sounds like the rubber gasket on the front of the washer has been torn. This part is a seal that keeps the water from leaking out of the door. This gasket is called a Bellow and the part number is WP8182119. If you order the part and its not the right part you can return it. It cannot be installed or used in any way. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
May 9, 2018
Is this the grey rubber thing that in front of the loader because the picture looks to thin for what is torn up in my washer . Thank you
For model number GHW9250MT0
Hi Brandon,
Thank you for your question. The part you are looking for is the bellow or the door boot seal. The part number listed under your model number for the bellow is PS11744939. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
