Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beth
April 2, 2019
If my Whirlpool slide in range is taking 45 minutes to heat to 200 degrees f, could the high limit switch need replacing? We replaced the broiler element and that didn’t repair the issue.
For model number RY160LXTQ02
Hello Beth, Thank you for the question. I suggest testing the Long Oven Sensor, PartSelect Number PS1570174. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Leo
April 12, 2023
Largest dual heat element on electric range was turned on and working, near high temp and then turned off and now none of the burners will come on when activated.
For model number G7CE3034XB00
Hello Leo, thank you for contacting us. Based on our research, we would recommend checking the high-limit thermostat, part number PS11744548, to fix the issue. Before replacing the thermostat, we would recommend checking the terminal block to see if power is coming to the cooktop or not. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
