Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11744518
At the floor of the oven is the bake element. If your oven is electric, the bake element will likely provide 90 percent of the heat for baking. Therefore, the oven will not heat properly if the baking element is faulty. If you can see that the element has been damaged, separated, or blistered, you will need to replace the part. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 20 inches long (including 5-inch-long terminals).
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches AND UNFORTUNATELY I DID NOT TURN OFF THE BREAKER TO THE OVEN AND THE LIVE WIRE TOUCHED THE SIDE OF THE OVEN AND A WHITE SPARK/EXPLOSION SCARED ME. LUCKY TO BE ALIVE AS I HAD NEARLY CRAWLED INTO THE OVEN WHILE DOING THIS. ALWAYS TURN OF THE BREAKER!!!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
By the time my husband got home I can disconnected the broken element. We received the new element by mail very quickly. My husband had it installed in 5 minutes.
two screws out and un pluged heat unit
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. It was a piece of cake.The repairs were complete in less than 4 days. A repair company could not make an appointment in less than a two week wait. Plus, we saved the repair bill.
Repair co. wanted $127.00 to come to our home to est. repair , plus time, labor, and parts. I used screw driver to take (2) screws out and pulled element out , inserted new element , and tested oven with temp. gauge. End of story !! saved at least $150.00 thank you!!! for having the parts. so easy a man that lives in a cave could do it.
My husband did the repair work in less than 15 minutes. He was happy and I was happier.
The repair went well. It was very easy. My husband removed the old element, rmoved the screws at the back of the oven, also the electrical connections. then put the new element in place connected the electrical clips, put the screws in place and the installation was complete. A screwdrive was all that was needed.There were no instructions included with the part.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.