Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James F - April 11, 2018
Verified Purchase
E-Burner Igniter Replacement
The sheet metal screws were hard to remove, and you have to be careful to not over tighten the sheet metal screws, or they will strip the metal. It was a twenty minute job.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 1.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Grill Ignitor needed to be replaced : order # 20418333
Still not fixed. Waited about a year for the part to arrive, due to "COVID supply chain issue". Part finally arrived and was missing a sub component (ironically the worn out part). Now awaiting a reorder confirmation that this is being sent along with a return mailing label. The re-order required me to obtain a better picture of th
... Read moree part from your competitor's web site, to prove the part sent was defective as your site was inadequate. My first call on this issue failed because of an absence of the better picture. The 2nd call to customer service was very understanding and professional but I have yet to receive any confirmation on this re-order in the past 5 days.
Read less
Steven from SOUTH EASTON, MA
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
March 18, 2019
I have a jenn air range, model #jds9865bdp. The two burners on the left side, which are in the unit that can be removed to allow for the insertion of the grilling element, do not ignite. When i try to turn on either of the left burners, i get the clicking sound, but the burner don't ignite. They will light with a match or lighter. The two burners on the right side ignite fine. What do you think is causing this problem? What part do i need?
For model number JDS9865BDP
Hello Steve, thank you for your question. The spark that lights the gas at those burners is the electrode. We would recommend replacing the PartSelect Number: PS11744120 Igniter Assembly. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.