Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element is attached. The rubber washer is used to prevent water leaking from your dishwasher during its cycle. Before making any repairs to your dishwasher make sure that you disconnect the power by finding the breaker for the dishwasher, and turning it off. The tools you will need to complete this repair include an adjustable wrench, and a 1/4 inch nut driver. This specific rubber washer is sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Rubber Washer
Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Leaking | Will Not Start | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WP717273 replaces these:
AP6010750, 680862, 717273
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
January 8, 2018
Whole board does not light up or work
For model number 66513262K114
Hello Dave, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS8260219. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Will
January 27, 2018
The rinse aid appears to be draining quicker than normal and a film is forming below the rinse aid component on the door. Is there a way to fix this? I've checked the seal on the fill cap and i've also adjusted the inside control lever. Neither seem to help. The detergent side of the component works fine. Dishes are clean and don't appear to have any more spots than normal.
For model number WDT910SAYE0
Hello Will, thank you for your question. There is probably a small leak in the rinse aid compartment. I would recommend replacing the whole dispenser for your appliance (which is the only way to fix any issue with the dispenser as it is sold as an assembly). Per your model number WDT910SAYE0 the dispenser is part number PS11752440. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
March 5, 2018
I have a kitchen aid kuds40fvwh2. My problem is there is water in the bottom of the dishwasher when the cylcle is finished. But when you push cancel the water will drain. Check valve is intact drain hose is clear and not kinked.
For model number KUDS40FVWH2
Hello John, thank you for your question. If the water will drain when cancel is pushed, the drain pump is functioning. If you've checked the check valve and it is in good condition the water is not coming back into the unit. It sounds like the issue is the electronic control board that is not functioning. The board is like a "timer". It runs the cycles, fill, wash, rinse, drain, ect. If the board is going bad the unit isn't getting the signal to drain at the end of the cycle. I would recommend replacing the board, part number WPW10285179. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Don
June 17, 2019
How difficult is it to replace water pump?
For model number Kdfe104Dss
Hi Don, thank you for your question. Unfortunately we do not have instructions for your model specifically. However we actually do have multiple installation videos on our YouTube channel that will show you how this installation is usually done: https://www.youtube.com/user/partselect/search?query=dishwasher+pump. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Don
June 17, 2019
No water sprays out during wash the cycle. Just had a new board put in.
For model number KDFE104DSS
Hi Don,
Thank you for your question. If the dishwasher is not spraying water during its cycle, this may be a result of the following:
1. Spray arm is clogged.
2. Dishwasher is overloaded.
3. Blocked Dishwasher pump.
4. Overfill float switch malfunction.
5. Water supply issue.
6. Water pressure problem.
You will need to check these issues and verify which one is causing the issue and fix it.
I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joanne
December 19, 2019
Not cleaning, water not hot. Put in new thermostat and heat element and cleaned top filter. All done but still not hit water or clean. What next??
For model number M665.13269k113
Hello Joanne, thank you for your question. If the element and thermostat were replaced and you're still having the same issue, the main control board is the most likely issue. I hope this helps.
Was this helpful?
Thank you for voting!
William
October 22, 2021
When ordering the rubber washer do they come 2 in a pack or do I need to order 2?
For model number 665.13263K112
Hello William, Thank you for the question. The Rubber Washer is sold individually and one is required for the Element. We hope this helps!
Was this helpful?
Thank you for voting!
Bruce
September 14, 2023
Can I purchase part # WPW10455268 seal only ?
For model number unknown
Hello Bruce, thank you for reaching out. The seal is only sold as part of the sump. In order to replace the seal, the sump will need to be replaced. We hope this information helps!
Was this helpful?
Thank you for voting!
Russell
March 14, 2019
Rubber seals gone in Kenmore dish washer, will that not get thing cleaning, where can you get them
Hello Russell, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
