Quick Question!

Have you ever purchased from PartSelect.com before?

11743224-1-S-Whirlpool-WP61005274-Dispenser Control Board
11743224-1-S-Whirlpool-WP61005274-Dispenser Control Board 11743224-2-S-Whirlpool-WP61005274-Dispenser Control Board 11743224-3-S-Whirlpool-WP61005274-Dispenser Control Board http://www.partselect.com/Schematics/Maytag/52535.gif

Dispenser Control Board

PartSelect Number PS11743224

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not dispensing water.

Compare At

$252.58

You Save

$42.10

Your Price

$210.48
Order within the next 1 hr and 55 mins and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 6 reviews What's this?
1-6 of 6
 

14 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Doug from Berkeley Springs, WV

The ice and water dispenser would run on after the glass was removed

I am going to be completely honest here. This problem had persisted for months. I finally decided that I would buy all the associated parts and repair the unit hoping to cover the problem. Much to my surprise, after carrying out the repair, using the instructions provided by PartSelect, I still had the problem. I decided to remove and LUBRICATE the button which depresses the Limit Switch when you push a glass against the rubber membrane. Low and behold the problem was solved. The frig is nine years old, so I feel I may have prevented other problems in the future by replacing the three parts. It was a follow the directions sort of repair. I was very pleased with PartSelect response to my order (received it next day) with standard shipping.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 19 people found this instruction helpful

Parts Used:
  • Dispenser Control Board
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Greg from Highland Village, TX

Ice dispenser acting irradically

Simple to fix. Watched the video and noted what to do.
Replaced the control board, solenoid, and limit switch. Woks like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Dispenser Control Board
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: W. J. from Linden, AL

Icemaker would not energize water solenoids, after it was replaced. Icemaker had hung keeping water on. Micro switch in fountain door had shorted out. I thought this may have ruined the control board.

after replacing control board, the water for ice maker still did not work. Took solenoid asy. out and the two cils for ice maker side were open. could not move wires to fountain solenoids because the fountain outlet to front was 3/8 inch and every thing else was 1/4 inch, so i had to order the solenoid assy. which is for coils. They
have also changed the tubing connections on the solenoids from compression screw on to insert
type once you push tubing in, there is no way
to remove it. reminds me of old electrical insert
connections which is a rip off.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
  • Dispenser Control Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: rudy from furlong, PA

Nothing would dispense. Indicator lights behaved eratically.

unplug refrigerator. pull off bottom tray. remove 2 cover screws. lift and pull cover. remove remove switch bd. screws. remove remove ribbon cable , top right. remove connector top left. reassemble in reverse.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: David from Nesconset, NY

Light wouln't go out in ice dispencer section

Extremely easy as I had alread taken the unit apart before except for the removal of the multipin connector from old board. Necessary to break the old board connector in order to get it off.

Might be nice for you to supply simple replacement instructions with the more expensive parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 14 people found this instruction helpful

Parts Used:
  • Dispenser Control Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Phillip from Minneapolis, MN

Ice maker light stayed on.

Replaced the control board.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6