Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11742049
This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Removed the old agitator (one bolt, two minutes).Upon receipt of the new part from Partselect (3 days) set the new agitator in place and reinstalled the bolt (two minutes). So simple
Help other customers find the most helpful instructions.
Were these instructions helpful?
replaced the part like your web site said and works great .thanks
First I removed the Softener cap. Then I removed the cap over the bolt. 7/16 socket to remove bolt. Removed old agitator and put in new one. Put bolt back in and reinstall parts taken out.
Removed the cap of the existing agitaor then selected the proper socket with an extension and removed the bolt. The old agitator was removed and the new one installed, nut replaced and tightened. Replaced existing cap. Actually took more time to take the new agitator out of the box it was delivered in.,
First I removed the nut holding the agitator assembly and replace it with the new one. It was a simple process and now my washer works like new.
Pretty simple, I removed one of the screws that holds the agitator, pulled it up completely and put the new one in. Took me 5 minutes to do so.
The 5 minutes installion required a 1/2 inch socket with an extensin bar to remove 1 screw.
remove fabric softener cap, lift off protective cap by handle to expose nut securing agitator assembly, use socket wrench with extension to remove nut, lift out old assembly (remove broken parts that fell off during removal. Drop new assembly in place secure with nut, replace cap and dispenser
replaced complete agitator to be on the safe side. Cheap enough fix.
I first removed the softener container by simply pulling it up & out. Secondly, I removed the 7/16" bolt that held the agitator in-place & again, simply pulled the agitator up & out. Then I placed the new agitator in, replaced the 7/16" bolt and the softener container - job complete (that simple).
Eveything went great. I oldered the part on Sunday evening...received shipping notification on Monday... part arrived Tuesday. Wow! I must say, I am not an appliance repair technician. The job was easy...real easy! I lifted off the softner reservoir...losened a bolt...removed the old agitator...installed the new agitator...tightened the bolt....put the softner reservoir back on....job done. I certainly will buy from this site again. Thanks PartSelect and Staff...Outstanding Service (5 Star)!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.