Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William M - March 19, 2019
Verified Purchase
Whirlpool Flashing Lights - Control Panel
The part came promptly and the repair was very straight forward. I will shop here again.
★★★★★
★★★★★
Larry V - August 17, 2018
Verified Purchase
Somewhat easy repair, part works great.
Everything on the part was as expected. Only issue was that there were two tabs on the back this new part that are not on my original part and the tabs were interfering with the assembly. Once I discovered this and broke the tabs off all was good.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Sart button would not respond.
Removed the 6 screws holding the panel on. Then remove the control board to expose the wiring for the panel,and disconect. Connect new panel, reconnect board, replace screws. Done.
Chris from Princeton, IL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
19 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eric
December 26, 2019
Normal light blinking
For model number GU2400XTP87
Hi Eric, thank you for your question. There could be a couple of problems. You may want to try unplugging your appliance for about 10 minutes. If the problem still occurs then you should first take a look at your door latch for being the problem. If that part is fine then the issue is likely in your control board. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.