Door Hinge WP33001759

Hello Greg, Thank you for your inquiry. Instructions for reversing the dryer door:1) Remove the hinge hole covers and screws.2) While supporting the door, remove 2 screws in the hinges that secure the hinges to the cabinet.3) Remove door by lifting slightly at the hinges and pulling the hinge tabs out of the hinge slots.4) Move the following parts to the opposite side of the door: 2 hinges and 4 hinge screws, 4 door screws,door strike and screw, inner door cover plate and screw.5) Attach the door to the opposite side of the cabinet using the 2 counter sunk hinge screws. Screw the lower hinge screw in first. This will help to align the door and hinges.6) Replace the hinge hole covers to the opposite side. This information is also available in the user manual for this model. Hope this helps!

Hi Kevin, Thank you for your question. No, it should not matter what side the hinge is on. If you are able to reverse your door then this would be the correct part. Is your door warped at all? Or any of your brackets in that area? Is your appliance level? Sometimes that can effect how the door shuts. I hope that helps. Good luck with your repair.