Quick Question!

Have you ever purchased from PartSelect.com before?

Models > MDE16CSAKQ

MDE16CSAKQ Maytag Dryer - Overview

Get Parts and Repair Help for MDE16CSAKQ

If you know the dryer repair part you need, you can browse the list of all parts on the MDE16CSAKQ, or you can search by name or part description. You can also find your part by where it is located on the MDE16CSAKQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for MDE16CSAKQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

$10.18

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit - purchase locally.

$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$22.44

Blower Wheel

This blower wheel does not come with a spring clamp, but it does have twenty fins and it is designed to fit a 3/8 of an inch motor shaft.

$4.12

Idler Spring with Rubber Dampener

$4.79

Leveling Leg

$77.00

FRONT- TUM

$10.25

Screw & Fastener Kit - Front Panel

$127.09

BACK- TUMB

SUB 33002790

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 434 of 451 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

catch mounted on door broke

  • Customer: Paul from Mt. Pleasant, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 66 of 86 people found this instruction helpful
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. read more

dried too many shoes and broke the baffles

  • Customer: Teresa from Pace, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 50 of 52 people found this instruction helpful
removed door, removed screws to lift top panel, removed screws that held old baffles, replaced with new baffles, took off front panel and cleaned out excess lint while I was in there. read more