Make sure you haven't got the discount earlier.
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Thrust Washer WP233520
Rated by 37 customers
Easy
1- 2 hours
Ratings submitted by customers like you who bought this part.
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Thrust Washer Specifications
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Replacing your Amana Dryer Thrust Washer
![Replacing your Amana Dryer Thrust Washer Replacing your Amana Dryer Thrust Washer](https://img.youtube.com/vi/NY6M2PvoBuY/maxresdefault.jpg)
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- 2
- 3
- Next >
Longest part was cleaning the inside of dryer and cutting new vent pipe exit.
-
Steven from MORRIS, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Wrench (Adjustable), Wrench set
-
Robert from TUTTLE, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
-
George from WORTON, MD
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set
-
Daniel from ridgecrest, CA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
-
Bruce from Frazer, PA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
-
John from Bel Air, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
David from Madison, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
-
Melody from Silverton, CO
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
-
Mike from Kremmling, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
2-removed lower panel-(2)-8mm screws
3-removed intake from fan-(3)-8mm screws
4-removed dryer's front panel-w/door assembly-(2)-8mm screws. (note there is a door switch you will need to disconnect the wires and remember which terminals they go to.
5-remove the front drum support-(4)-8mm screws
** ... Read more *** at this point the drum is exposed *****
6-reached under the drum pulled the tensioner to relieve tension on belt, then dismounted the belt from only the tensioner and motor shaft; leave the belt on the drum!
7-pull drum toward you and forward about 3-to-4 inches, this exposes the drum rollers.
8-use a screwdriver and pry-off the retaining clip on the end of the roller's shaft and remove the roller.
9-remove the roller support-(2)-8mm screws
10- reinstall new roller support
11- apply a light coat of disc-brake hi-temp wheel bearing grease to the roller support shaft, very light!
12-install a new wavy thrust washer, new roller(note they will say "front" on the side that should face you. Don't mount it backwards!
13-install the outer thrust washer and the new retaining clip; use a flashlight for this part!
14-repeat for the other drum roller.
**** while you have it apart use a vacuum to remove lint from every where you see it; it is a fire hazard!
**** if you think you need a drive belt now is the best time to change it *****
15- re-assemble the dryer in the reverse order, don't forget to re-install the drive belt and be careful not to pinch the door switch wires.
16-re-plug the drier and test
-
Remy from Santa Maria, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
- < Prev
- 1
- 2
- 3
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
4 people found this helpful.
- < Prev
- 1
- Next >
![Multi Rib Belt – Part Number: WP40111201](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11742271-1-N-Whirlpool-WP40111201-Multi-Rib-Belt.jpg)
![Drum Support Roller – Part Number: WP37001042](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741913-1-N-Whirlpool-WP37001042-Drum-Support-Roller.jpg)
![Idler Pulley Wheel with Bearing – Part Number: WPY54414](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11757553-1-N-Whirlpool-WPY54414-Idler-Pulley-Wheel-with-Bearing.jpg)
![Retaining Ring – Part Number: WP23748](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11740487-1-N-Whirlpool-WP23748-Retaining-Ring.jpg)
![Drum Support Roller and Shaft Assembly – Part Number: WP40113601](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11742273-1-N-Whirlpool-WP40113601-Drum-Support-Roller-and-Shaft-Assembly.jpg)
![Idler Pulley Shaft – Part Number: WP56461](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11742857-1-N-Whirlpool-WP56461-Idler-Pulley-Shaft.jpg)
![Produce Preserver Filter – Part Number: W10346771A](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3503014-1-N-Whirlpool-W10346771A-Produce-Preserver-Filter.jpg)
![Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/1960673-1-N-Whirlpool-W10135699-Affresh-Washing-Machine-Cleaner-3-pack.jpg)
![Affresh Dishwasher Cleaner Tablets - 6 – Part Number: W10549851](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12345667-1-N-Whirlpool-W10549851-Affresh-Dishwasher-Cleaner-Tablets-6.jpg)
![Affresh Cleaner – Part Number: W10282479](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/2367638-1-N-Whirlpool-W10282479-Affresh-Cleaner.jpg)
![Cooktop Cleaner – Part Number: W10355051](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/3492527-1-N-Whirlpool-W10355051-Cooktop-Cleaner.jpg)
![Affresh Ice Machine Cleaner – Part Number: W11179302](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12583750-1-N-Whirlpool-W11179302-Affresh-Ice-Machine-Cleaner.jpg)
Manufacturer Part Number: WP233520
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.