Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel E - November 24, 2022
Verified Purchase
easy to replace
Got the right part and had customers ice dispenser working in no time.
★★★★★
★★★★★
Bill B - August 21, 2018
Verified Purchase
Ice Crusher Repair.
The parts that I ordered from PartSelect were just what I needed. On the previous auger the screw that fastens gear to the auger had sheared and the auger was impossible to rework. The new parts were somewhat difficult to assemble without a set of instructions or a diagram showing the location of the various parts. My suggestion is to carefully document the location of the various parts before you attempt disassembly.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
February 10, 2020
The motor runs but does not turn the auger in the ice bucket and thus does not dispense ice. Problem seems to be in the lower assembly in the door.
For model number 106.58902801
Hi Dennis, thank you for your question. If you are looking for the problem down in your dispenser control area, then you may want to take a look at the microswitch, and the control board for your dispenser. If those parts are fine then the issue might actually be motor itself that is the issue. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Novel
February 13, 2020
Why am i not getting ice from the bin
For model number MSD2669KEY01
Hi Novel,
Thank you for your question. If ice is not being dispensed from the bin, there are some parts that you will need to check to see which one is causing the issue. You will need to check the ice door kit, the ice maker, the ice auger motor shaft, the top ice crusher coupling, the seal, the water inlet valve, the dispenser motor, the water filter, the water fill cup and bearing, the auger, the cycling thermostat and the holder. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.