Part Location Diagram of WP22002099 Whirlpool Boot Cable/Tub Spring
See part 19 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Boot Cable/Tub Spring WP22002099

 Fits your MAH7500AWW!

Rated by 1 customer 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 21.32
  On Order
 Fits your MAH7500AWW!
PartSelect Number PS11739331
Manufacturer Part Number WP22002099
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Crosley, Amana.
Part# WP22002099 replaces these:
22002099
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Water Leak on front of (Front Loading) Washer
I researched the internet and found my answer on this site. There were others who shared their experiences which made the repair easy. There was a leak in the front gasket between the drum and outer frame. I printed out several answers that customers had posted. I opened the front door on the washer and found a tear in the bottom of the gasket near the drain hole.
To use the washer until the parts arrived (which only took 2 days), I used a bike repair patch to seal the hole in the gasket. NOTE: Don't use the glue type as it may get on the clothing. I used a patch that you pull off the backing and apply. It worked great until I got the parts.
Another party had posted how he got the cable and spring attached on the gasket. He used fishing line. I used masonary string I got from Home Depot. I made a loop on one end and attached it with the spring and pulled both around the gasket after I had positioned it on the back drum. I looped the string over the other end of the spring and pulled. As the spring stretched, I hooked the other end of the cable on the spring. It worked perfectly. Note: Don't worry about the string being underneath the cable, you merely pull it out slowly and the hard part is done. I then hooked the front of the gasket into the slots and finished the job. It took about 40 minutes alone.
P.S. Parts select got my ordered filled and sent to my residence within two days. Great experience and I would not hesitate to order from them again.
Other Parts Used:
BOOT CABLE CLAMP Boot Cable/Tub Spring Bellow
  • Harry from Otsego, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
12 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739331
Manufacturer Part Number: WP22002099
Brand
Model Number
Description
Crosley
CAH4205AWJ
Washer - Residential
Crosley
CAH4205AWW
Washer - Residential
Maytag
MAH14PDAAL
Washer - Commercial
Maytag
MAH14PDAAQ
Washer
Maytag
MAH14PDAAW
Washer - Commercial
Maytag
MAH14PDABL
Washer - Commercial
Maytag
MAH14PDABW
Washer - Commercial
Maytag
MAH14PDAEW
Washer
Maytag
MAH14PDAGW
Washer
Maytag
MAH14PDBAW
Washer
Maytag
MAH14PDBEW
Washer
Maytag
MAH14PDBGW
Washer
Maytag
MAH14PDCBQ
Washer
Maytag
MAH14PDCBW
Washer
Maytag
MAH14PDDWW
Washer
Maytag
MAH14PDSAW
Washer
Maytag
MAH14PNAEW
Washer
Maytag
MAH14PNAGW
Washer
Maytag
MAH14PNAWW
Washer
Maytag
MAH14PNBAW
Washer
Maytag
MAH14PNBEW
Washer
Maytag
MAH14PNBGW
Washer
Maytag
MAH14PNSAW
Washer
Maytag
MAH14PRAWW
Washer
Maytag
MAH14PSAAW
Washer - Commercial
Maytag
MAH20PDA3W
Washer
Maytag
MAH20PDAWQ
Washer
Maytag
MAH20PDAWW
Washer - Commercial
Maytag
MAH20PDCXQ
Washer
Maytag
MAH20PDCXW
Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service