Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739026
This ice guide is located in the freezer door.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
The ice guide slipped into place and latched into the arm with no problems. The nozzle went in so easy once I figured out that it was run through a tube in the door, I thought at first I was going to have to take the door apart. The biggest surprise was the how quickly I got the parts, I recieved in 1.5 days. Thats amazing. Thank You.Stan
Help other customers find the most helpful instructions.
Were these instructions helpful?
Popped fromt pannel off from bottom side removed 2 screws from control bracket and took switches etc. off old bracket. removed broken water tube and cut top off. Secured black tubing together and pulled down through door fastened into exixting fitting repolaced one screw. placed switches onto new control bracket and okaced back with 2 screws. Snappec ice guide in place then replaced cover into notches in top and snapped into place. incerted 2 new door handle trim clips into trim and slid into place,,,,finished
Just clicked it in place and was done in less than a minute. Thanks for the fast ship and right part.
The drawer just slid out and the new one slid right in. The ice guide popped out and the new one simply snapped right in. Thanks PartSelect.com!
This one is not rocket science, however, it does take some careful "fudging" to accomplish without additional disassembly. The Ice Guide is held in place by three tabs. The tricky part is "tilting" the center tab into it's hole/slot on the ice dispenser lever (center hole), then tilting it up to snap into place.... there is a very tight tolerance here, with the opening of the ice/water dispensing unit. Be sure to "lock out" the ice maker/water dispenser, in order to be able to use the light. Once snapped in place, all is well.
Pull the drip tray out, then use the scraper to pop the front off . Remove wire connections and set aside. Pull the next plate that has the light in it and tape out of the way. Snap the out guide out and snap the new one in. Put the light plate back in attach the connections back to the plate snap back in put the drip tray back in place. All done
I watched the video on removing and installing ice guide. It was on point. Thanks!! It took about 1 minute to install.
Just bust out the old part, snap in the new part. It couldn't be more simple. I wouldn't have tried it without the video. Once I did it, I decided I will always check here first!Tim
The repair was super easy. The part was shipped as promised. In fact, it arrived a day earlier than expected. I simply unpacked the guide and positioned it under the Ice Dispenser Door and applied gentle pressure. It snapped into place and works like new.
I haven't quite figured out how to get this completely installed. I'm having trouble getting the middle tab to insert. But I do have it working for now until I can have someone else look at it for me. I'm just happy I was able to find the part!
Just push in
Just follow the video on the website. Great instructional video. Ordering and delivery was excellent. FedEx is my favorite delivery service. I do a lot of purchasing and Parts Select was the easiest. Website is well thought out and simple to use. Emails keep you informed of the order status.
watched the video and did as the video said - no problem
The new ice guide snapped easily into place with the aid of a small-sized screwdriver. Very simple to do. We watched the installation video on your website as well. Thank you!
It was very simple, exchange the damaging parts Crisper Pan and Ice Guide.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.