http://www.partselect.com/Schematics/GE/GE_Thumb/00125643i03.gif
See part 703 in the diagram
http://www.partselect.com/Schematics/GE/GE_Thumb/00125643i03.gif

Upper Rack Wheels - Kit of 4

PartSelect Number PS11721505

This is a kit of 4.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $24.36
  • You Save

    $4.06
  • Your Price

    $20.30
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 16 reviews What's this?
1-5 of 16
 

378 of 387 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerJoseph from Haymarket, VA

Worn/broken plastic parts were causing misery

Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness with our dishwasher has increased 100%. BTW, thanks to the very helpful, friendly and knowledgeable staff at PartSelect.com -- next job, replace the ice maker in the freezer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

20 of 24 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerStephen from Maple Valley, WA

Part broke after wearing out

pulled the racks out, replaced the broken parts....easy job

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 28 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerWarren from Stillwater, MN

Top and bottom rack were rusted thru

Bottom rack - slide the old one out, slide the new one in. The rack came came with the wheels, so I didn't use the replacement ones.
Top rack - remove the rail end caps - they will likely break so order new ones. Slide the rack out. Remove the rotating spray arm and then remove all the brackets. I was able to re-use the old brackets and didn't need the replacements. Install the old brackets on the new rack, install the spray arm, and slide the new rack back into the rails. The new top rack also came with wheels installed, so I didn't use the replacement ones. Once the rack is back in the rails, install new rail end caps. Put them in sideways and facing into the washer. Straighten the caps and turn them into place. Be careful with the rail caps - they break easy and are expensive. Make sure they hold the top rack in place, and that's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsPliers

CustomerRoger from Simi Valley, CA

Broken wheels and attachments

Everything snapped on quite easily. I was releaved to not have to replace "everything."

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Upper Rack Wheels - Kit of 4
  • Upper Rack Wheels - Kit of 4

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerNancy from Big Rock, IL

The rack wheels and axles on the dw had broken, causing the upper rack to come flying out when opened.

Took the rack out. Took off the broken wheels and axles. Popped the new ones on, while replacing the rack. Piece of cake! Saved over $100.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 16