Make sure you haven't got the discount earlier.
PCB Assembly UI-MC AND SW WE04X23220
Fits your GFDR485EF1RR!
$
359.95
In Stock
Get FREE EconoShip on orders over $100! T&C apply
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your GFDR485EF1RR!
PartSelect Number PS11700884
Manufacturer Part Number WE04X23220
Manufactured by
GE
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric.
Part# WE04X23220 replaces these:
WE04X10185, WE04X10196, WE04X10197, WE04X20682
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shawn
November 21, 2019
When you say replace the plug from the old board, I do not follow? I plugged in all 8 wire connections into the new board.
For model number GFDR480EF0WW
Hi Shawn,
Thank you for your question. When you removed the old PCB board and replaced it with the new one, did you attach all the wires to it. If there is a wire that was missed and not attached to the new board, it may cause the symptoms you mentioned in your previous question to us. Make sure that all the wires are connected to the board correctly. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jason
November 27, 2018
My dryer mother board powers on and i can cycle through all of the options, but when i push the start button it shuts off completely for about 4 seconds and then comes back on. The dryer doesn’t start. When i tried getting the service error code it gives me a 005 eeprom error. It will not let me run tests and t7, t8 or t13. Is the motherboard the only part that could cause this issue?
For model number Gfdr485ef0rr
Hello Jason, thank you for your question. Yes, this does sound like the main board issue. You can test the thermostats to be sure they have continuity, just in case the issue is one of them. Sometimes if a thermostat or fuse is blown the unit will not start. I hope this helps!
Was this helpful?
Thank you for voting!
Jason
March 6, 2019
My dryer mother board powers on and i can cycle through all of the options, but when i push the start button it shuts off completely for about 4 seconds and then comes back on. The dryer doesn’t start. When i tried getting the service error code it gives me a 005 eeprom error. It will not let me run tests and t7, t8 or t13. Is the motherboard the only part that could cause this issue?Jason for model number gfdr485ef0rr
november 28, 2018
answer:
hello jason, thank you for your question. yes, this does sound like the main board issue. you can test the thermostats to be sure they have continuity, just in case the issue is one of them. sometimes if a thermostat or fuse is blown the unit will not start. i hope this helps!
i have replaced the main control board, both thermistors and the thermostats. i still get the same eprom error 005. what else could be causing the problem?
For model number Gfdr485ef0rr
Hello Jason, thank you for inquiring. Try cutting the power to the dryer for five minutes as this may reset the Main Control Board. If the error code comes back, then you will need to replace the it. The Main Control Board for model GFDR485EF0RR is PS11700884.
Was this helpful?
Thank you for voting!
SHAWN
November 21, 2019
I just replaced the pcb board with part # weo4x23220. Turned the power on and all i get is flashing lights?? does it need to be reset or something??
For model number gfdr480efoww
Hi Shawn, Look on you old control to see if you left the plug in the old control and if so take it and place it on your new control. This should correct the problem. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
SHAWN
November 21, 2019
Yes i reconnected every connection snug, still only get flashing lights,
For model number gfdr480ef0ww
Hi Shawn, there is a plug on the old control that tells the control board which model the control board is connected to. If you are sure that you reconnected this plug then i would contact the manufacturer directly for further assistance. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Brad
January 3, 2020
Is there a parts install instructions that comes with this?
For model number GFDR485EF0mc
Hi Brad, we do not guarantee installation instructions will come with this part. However we do have a video that should help here: https://www.youtube.com/watch?v=xW0NoA7d6WY. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
John
November 8, 2018
I have a dryer and have been told i need a control panel, and harness. Is the part below compatible?
For model number GFDR485EF0MC
Hi John, thank you for your question. Yes, this would be the correct part for your model. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11700884
Manufacturer Part Number: WE04X23220
Manufacturer Part Number: WE04X23220
Brand
Model Number
Description
Back to Top
PCB Assembly UI-MC AND SW
$
359.95
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.