Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the General Electric Refrigerator ZISW48DSC. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
Replacement icemaker kit - electronic. This kit includes a 4 pin round plug-in connector, 6 post plug-in connector, tube and fill cup.
This valve comes with 1/4" compression inlet.
NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.
This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.
This fill tube grommet is used on the icemaker.
This part comes with 3 round pin connection terminals.
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps...
Comes in a package of 12
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.