ZISS480NMC General Electric Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The old one was leaking
Found the problem, seen what it was looked up the part, watched the video was real easy to fixed so did it myself. If I would of called a repair man it would of been around $200.00 for everything I did it for the price of the part.
Parts Used:
-
Chuck from Uniontown, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Water dispenser not working
Unplug refrigerator. Take off back plate with socket driver. Take screws off inlet valve. Then with bowl underneath to catch water, pull off hoses from compression fit. Then reverse to put back together. (Cleaned and dusted the back/sides of fridge too!)
Parts Used:
-
William from Medfield, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
would not "dump" ice cubes
I am more than 80 yrs, always thought I could fix just about everything--but, this looked complicated. Once I received the new icemaker; took a good look where the screw-holes, etc. were, then removed the "old" one. Took about 20 or 30 minutes, then the "new" one was easily installed.
Parts Used:
-
Phayo from Lake Charles, LA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Refrigerator freezing.
Temp. Sensor was under an egg shaped cover on the left side wall in the refrigerator. Remove the cover, cut the two wires to the old sensor and remove it. Connect the new sensor to the two wires using butt connectors. Replace cover and done.
Parts Used:
-
Wayne from Rancho Cordova, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No water from dispenser
Just like installation video said. One error I did not read first note that check to see if line was frozen, which it was. Nothing wrong with valve, but changed it anyways. Works great now. Thank for all the help. You all are great.
Parts Used:
-
Mike from Brooksville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!