All Installation Instructions for General Electric Refrigerator ZIS420NRE

Water in Door would not cut off. Solinoid on flap ice shute would not close. Corroded and inoperable.

The video instructions were outstanding in showing how this repair was to be completed. Follow these instructions and Job was very easy. Replaced ice shute flapper and arm, soloinoid and Micro switch for water flow control. Reassemble by reversing procedure. Follow video instructions on how to replace water control valve in back of fridge. Test water flow at bottom front of fridge and defrost flow tube in door if necessary. I used tupperware container with hot water on top of ice shute shelf in fridge door. A couple of times changing and water was flowing. Great site and detailed video instructions for an effective and cost saving self repair. I saved several service trips and service calls and labor costs of a service tect. Parts costs were also a lot cheaper than service tech would have charged. Thanks PartSelect.

Parts Used:

WATER VALVE WITH GUARD

Kenneth from Blairsville, GA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

No water to ice maker and water

Watch to step by step video instructions on your site. Great service! Part arrived the following day after order!

Parts Used:

WATER VALVE WITH GUARD

Stephanie from Tishomingo, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Replaced the door bin

SO easy, just took the old one off and popped the new one in. Why I am bothering to write this is that the first time I ordered the wrong part. I got it so quickly and the refund was made as quickly. Then I tried again and I got it right thet second time. Thanks, Mary

Parts Used: