YWED9550WL1 Whirlpool Dryer - Instructions

I replaced the thermal fuse and it started right up.

just the way the video showd me

Seriously, there's no need to explain how to do it because the video shown on how to change the thermal fuse is as precise and accurate as it can get. You should have no problem switching out the thermal fuse as long as you have watched the video!

The power would go on but the machine didn't turn so the first thing I did was input make into google search and found blogs and how to videos. Numerous blogs stated the thermal fuse was the issue so we purchased a thermal fuse and Internal-bias thermistor also since they are right next to one another. After receiving the parts you have to disassemble the dryer even removing the drum but it's not hard at all (watch video). I replaced the parts, reassembled the dryer and it worked fine. Without a doubt, this place was not only the cheapest in cost but I received the parts in 3 days. The fed-x states 3 days to deliver but I received in 1 1/2 days from when they picked up the part. Very happy all the way around!!

replaced fuse great website

Getting the fan off proved to be quite an issue. on my model, it loosened in the clockwise direction. I ended up having to completely pull the motor and clamp the unit in a vice before I was finally able to gett itloose.. Hopefully yours will not be such a problem....

I followed the instructions from the video and had no problems

Dont believe that '1.8 days average delivery' time. if you need to parts in days, get them delivered overnight. Otherwise it was very easy to seals, rollers and belt. Only advise is on the seals. you might want to sort of stretch them out a bit so they are easier to slip on because once you have the glue on there it is harder (and messy) to be stretching them on

I watched your YouTube video about trouble shooting dryers, and found that the problem was my thermal fuse was out. My exact model of dryer was used in the video. I ordered the part and replaced it following the instructions on YouTube. Since the video was so helpful, I decided to order my part from your company

Most of the time was spent just getting behind the dryer and removing the back panel. It was also a great time to vacuum the area. If you're not working in tight quarters, this repair is really easy. The fuse is not hidden and requires no tools to install (only a wrench to remove the back panel). It started working right away & the part cost significantly less than a service call (about nine bucks + shipping).

Got the latch kit, found the correct one, popped it in...dryer works! Thanks....

The kit turned out to be missing a 7.40" 4" diameter vent that was needed so ending having to get my plumber to use what was there with a "cut and paste" job - took him over an hour. He did say that had the right piece been there, it would have been easy.

The repair went great . Thanks for the part ,will be purchasing parts from you now on.

Used video of PartSelect guy on YouTube to diagnose bad thermal fuse with multimeter. Removed back panel of dryer with nutdriver, removed thermal fuse, found no conductance across terminals. Ordered new part. (It arrived very quickly!) Put in new thermal fuse, replaced back panel. Shortened flexible vent tube so there would be fewer bends. Dryer works now.

Having read the instructions and watched the tape, I pried out the remaining catch with a flat screwdriver, read about what the color scheme on the parts wasbout and pushed in the correct part. Voila ! Done in probably two minutes.(By an 82 year old woman!)