Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YMED9600TK0

YMED9600TK0 Maytag Dryer - Overview

Get Parts and Repair Help for YMED9600TK0

If you know the dryer repair part you need, you can browse the list of all parts on the YMED9600TK0, or you can search by name or part description. You can also find your part by where it is located on the YMED9600TK0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for YMED9600TK0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$14.96

Idler Pulley with Tri-Ring and Gasket

A dryer's idler pulley helps the belt to rotate the drum. Also known as dryer belt tension pulley wheel.

Order within the next 10 hrs and your part ships today!
$27.79

Lint Filter

This filter collects lint as it passes through the dryer vent.

Order within the next 10 hrs and your part ships today!
$6.42

Heating Element Connection Wire Kit

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

Order within the next 10 hrs and your part ships today!
$33.27

High Limit Thermostat and Thermal Fuse Kit

Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than the thermostat. Once it trips, it has to be replaced.

Order within the next 10 hrs and your part ships today!
$5.15

Leveling Foot

Sold individually.

Order within the next 10 hrs and your part ships today!
$16.63

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

Order within the next 10 hrs and your part ships today!
$40.18

Dryer Drum Seal with Adhesive

This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.

Order within the next 10 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 10 hrs and your part ships today!
$184.80

Drive Motor with Threaded Shaft - 120V 60Hz

The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.

Order within the next 10 hrs and your part ships today!
$34.56

Terminal and Wire Kit

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

felt strip came off lint screen

  • Customer: JEFFREY from FALL RIVER, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 146 of 182 people found this instruction helpful
ordered new lint screen, removed old screen, inserted new screen. read more

catch mounted on door broke

  • Customer: Paul from Mt. Pleasant, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 65 of 85 people found this instruction helpful
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. read more

Rear tub seal failure

  • Customer: Jerry from Everett, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 45 of 57 people found this instruction helpful
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine read more