Enter the code TAKE10OFF at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on May 28 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
Used an apex bit unscrewed the fittingand down came the light cover. Pulled the old bulb out and had to use a flashlight to line the prongs up to install the new one. Whileeverything was down used an oven cleaner to degrease and clean EVERYTHING. You wouldn't beleive how much grease and debris will accumulate in 5 years. And I only fry bacon once in a blue moon. All in all it was simple to order, clean, and repair.
turntable broke, spring was missing, filters needed changing
it was a breeze, the parts arrived in great condition and all was self explanatory, No directions or tools needed - filters replaced, turntable placed back in microwave and spring replaced.
Turntable Driver was down to two legs . . . one had melted into a blob!
I removed the injured turntable driver . . . had lost one of its three legs due to some sort of uber-thermal meltdown! As a result, the microwave turntable was turning a bit, stopping, turning a bit more, stopping . . . I was concerned I wouldn't be able to find such a tiny little part, but voila . . . PartSelect had what I needed. Other than the cost (it's just a tiny piece of plastic!) and s/h . . . I'm happy to have a fully functional microwave back! I simply popped the new turntable driver into place and replaced the glass turntable and plastic ring.
replaced the above and t. ring, spacer and motor. from underneath the microwave, two screws lets motore drop down, then detach two wires from terminals on moter (be sure to unplug the microwave first) and from insdie the microwave the driver pulls up off the motor shaft easily.
There was no installation involved. I just placed the new tray in my microwave. What is amazing however, is I ordered my part early one morning, the tray arrived at my door step the next day.I paid for regular shipping. Thanks guys good work
We took out 10 screws on bottom of microwave. Removed turntable motor. Determined motor was bad by turning and listening while it was turned by hand. Bought motor online. 2 days later motor arrived and we installed it...EASY BREEZE Microwave works GREAT....
Unplug microwave. Remove turntable and support from inside. Remove outside bottom cover (10 screws). Remove 2 torx screws holding motor in place. Remove 2 wires from motor, noting colors. Wires are held with spade connectors that has a small tab that needs to be depressed. Remove washer from motor and place on new motor. Entire procedure very easy.
My girlfriend's microwave did not spin anything and didn't cook very well
I opened the door, inserted the part, and automatically became her hero! She even began to sing Bette Midler's Wind Beneath My Wings: "Did you ever know that you're my hero..."