Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door wouldn't stay closed
I used a screwdriver to pry out the broken door latch and inserted the new one in the same slot. Perfect fit. The picture of the part in the order page was a big help to identify the correct part.
well.....first I opened the dryer door and pulled out the old cracked lint filter...then I took the new lint filter out of the plastic bag and put it in the dryer......and then I closed the dryer door.....then I had a beer.
The old door catch broke and fell into the unit. Ordered the new part which arrived fast and snapped it into place. Perfect fit and the door now closes/latches correctly - like new again. Would recommend your web site to all do-it-yourselfers. Loved browsing your site, especially seeing all of the schematics and parts list for my unit.
Removed the old lint filter and slid in the new one. It took me longer to get the box open to get the new lint filter out than it did to actually replace the part.
Just snapped the new plastic latch into the hole (the hole was there because in trying to extract the old latch, it fell into the inside of the door). Took two seconds. Order to arrival of the part took only 22 hours!
just replaced the part. I was happy how simple it is to order the parts from PartSelect, and be able to get the right measurement needed.plus how fast it came. Thank You and Keep up the good work. Ada APONTE
There was no reair needed. We just needed to replace the filter. The new filter arrived in a very short time and now we are drying clothes without losing lint through the dryer vent. Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed. This was a very satisfying order experience!
I bought from you and received part in timely manner. I got it out of the box and replaced. It's better than the one I got new with dryer. Thanks, P.Blades.
I removed the old door seal and installed the new one algining the slots with the inserts and the seals. Old filter out, new filter in. Install was successful but dryer still not drying even though it's producing heat. I guess I will need a replacement.