YE204KW Magic Chef Dryer - Instructions

I unplugged the dryer then removed 2 Phillips screws from lint trap. Then I popped the top up on each top corner with a screwdriver. I removed the 2 screws holding the front cover. I unclipped the wiring connection and moved the panel. I took out the old belt, put the tensioned back on then put the new belt around the drum and held the drum up with my shoulder then put the belt through the tensioner and put it on the motor spindle by pushing the tensioner back. I put it back together and it worked perfectly. Your video was very helpful. Job was very easy.

The instruction sheet that comes with the parts is excellent. Follow it and all goes well. Be patient and stay away from the sharp sheet metal edges present in all such appliances !!

PS2031037 Door Seal We were amazed at how quickly to find the site, order the part, RECEIVE the part. In just a matter of a few days, dryer was once again functioning properly. Seldom do Retailers get it, YOU GUYS GOT IT! Thanks very much

Replaced thermal fuse actually fixed the problem, but also replaced the heating element since you have to remove it to get to the fuse. Just remove the top and parts are accessed in the rear 3 screws.

Fast shipping. Part arrived the next day!

I followed the instructions you supplied. All went well. The short movie that you supplied was fine but the only tricky part which included placing the belt over the idler wheel was not well done in that the repairman's arm covered the work area. Delivery time was excellent.

im a car mecanic it was easy

I was able to take apart the dryer myself and get old belt out, then my son helped me remove the drum and put new belt on. Well worth fixing; it works great again and the part with shipping and handling was only $17.00! better then price of new dryer!!!Thanks, Mary ( Cincinnati)

replaced belt first didnt fix the noise so i replaced rear drum support roller kit and that fixed the noise this was a cheap fix cost me about 70.00 dollars verses a new dryer thank you your website was a big help

In previous work, I replaced the rollers, but the noise remained, so I figured it was the Idler that was the problem, it appeared to be worn. The repair is pretty straight forward, open the cabinet, remove the front and remove the belt. Once the belt is removed take the old idler assembly out and put the new one in. Making sure you the entire assembly is inserted properly into the guides. I then put a new belt on as I figured that as long as I had gone this far, might as well replace the belt to prevent future problems and more work. I put the belt on and then put the drum back in, making sure it seated properly on the rollers. The hard part is getting the belt on the idler and drive pulley properly as there was no way to prop the idler all the way back against the spring pressure. However once everything is aligned everything was set properly. Replaced front and closed top. Unfortunately the noise remained, it seems the real cause of the noise was the fan assembly which had self destructed at the hub and was no longer turning at the same speed as the motor shaft. I opened up the fan assembly and removed the fan. I used one of the rollers as a hug for the fan and installed a set screw into the side so that the fan would lock onto the shaft. The roller had the same diameter hole as the motor shaft and all went together perfectly. Problem solved for now. Nothing I read suggested that this could be a problem and I never suspected that it would be as it was pretty much a closed system. I proceeded to order a new fan from Partselect. Incidentally, the new fan hub opening is nowhere near the proper size, I split the fan trying to get it to go on the shaft, that was even after filing some of the material off. The difference is at least 1/16 inch smaller than the shaft diameter.

Followed the directions from online site. Checked the voltage to the machine, checked the door switch, checked the high limit thermostat checked the high limit switch and found that the red marked switch had no continuity. Ordered the switch and replaced it and started using my dryer

replaced the belt

ordered a new fan from your web site and replaced it. it only took a couple of days to get the part thanks for such good service well pleased will use you again in the future

even though the motor pully was invisible to me, i was able to, by feel, thanks to your diagram, install the belt.

Removed front dryer panel removed torn belt and replaced it with the new belt.The job was easier than i thought.