Models > WWSE5200B1CC > Instructions

WWSE5200B1CC General Electric Washer - Instructions

All Instructions for the WWSE5200B1CC
421 - 422 of 422
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The gear agitator had striped. Wouldn't spin the blades to wash the clothes.
I pulled up on the fin part of the agitator exposing the gear coupling. I unbolted the nut on top with a 12 mm socket. Once the nut and washer were removed I pulled up on the gear coupling and slid it right off. Reversed procedures to install the new one.
Parts Used:
Agitator Coupling Kit
  • Gerardo from Mountain House, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
Was this instruction helpful to you?
Thank you for voting!
The knob broke
Took the knob and clip off the dryer and stuck the knew knob on!
Parts Used:
Knob and Clip
  • Sara from Destin, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WWSE5200B1CC
421 - 422 of 422
Back to Top