Models > WWA5412VEL > Instructions

WWA5412VEL General Electric Washer - Instructions

All Instructions for the WWA5412VEL
31 - 31 of 31
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Machine stopped agitating
1. Lifted Agitator out. 2. Heated Sleeve until loose. 3. Pushed old Rubber out of Agitator. 4. Cleaned Splines on Agitatorshaft and inside of Agitator. 5. Used Lithium Grease to lubricate inside of Agitator. 6. Used Hudraulic Ram to press New Coupling in place. 7. Placed Agitator on Agitarorshaft. 8. Closed Machine and ran a cycle to make certain particles from repair were cleaned away.
Parts Used:
Agitator Coupling
  • John from Madison, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WWA5412VEL
31 - 31 of 31
Back to Top