Enter the code DIYDAD10 at checkout to apply your discount. Discount will be applied at checkout when the code is entered & applies to all parts. Cannot be combined with any other coupon or special offer & cannot be applied to a previously placed order. Not valid toward tax or shipping & handling. Discount has no cash value. Discount expires on June 17 at 11:59pm EST.
You've Got 10% Off Your First Order!Save 10% with code at checkout *click to copy coupon code
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.02
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.12
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
This lid lock assembly is supplied by the original manufacturer for use in various models of top-load washing machines. The assembly includes the lid lock mechanism and the wiring harness. You can fin...
$144.02
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
$8.02
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
This is a water inlet valve made for washing machines. This part is used to control the flow of water into the fill hose of the washing machine, to allow the washer to fill up with water. If your wash...
$92.31
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.68
In Stock
Order within the next 1 hr and 25 mins and your part ships today!
Order within the next 1 hr and 25 mins and your part ships today!
Questions And Answers for WTW7000DW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
September 20, 2022
Does the code # help E3 ore F5
For model number WTW7000DW1
Hello Don, thank you for contacting us. E3 or F5 error code indicates a problematic door latch or lid lock. Please check the lid and make sure nothing is stuck in the lid, if yes then remove any obstruction. If this does not help, the lid lock assembly, part number PS11722981, is most probably faulty and will need to be replaced. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Only hot water goes though washer! Changed hoses , screens. Get LF code!
Thinking it’s water valve inlet? Can you help?
For model number WTW7000DW1
Hi Sandra, thank you for reaching out. According to our research, the LF code indicates the washer is taking too long to fill. We would recommend checking the water inlet valve, part number PS12349461. We hope this solves your problem!
The washer is leaking and it’s not leaking from the inlet valve or the hoses or clamps
The water is dripping off the bottom of the centre of the washer
Where else could it be leaking from
Thanks Doug
For model number WTW7000DW1
Hi Doug, thank you for the question. The water leakage indicates that you may need to replace the washer, part number PS11770333. Good luck with your repair!
NO WATER FILL I TEST THE WATER SWITCH WITH OHMETER ALL HAVE CONTACT THEN I UNPLUG THE MAIN VALVE AND USE A 110 VOLT WIRE DIRECT AND WATER GO IN
For model number WTW7000DW1
Hi Gaetan, thank you for reaching out. Based on the description that you have provided, we would recommend checking the valve wire harness, part number PS16218050, as it might be faulty and may need to be replaced. We hope this helps!
Hello Francisco, thank you for reaching out. Based on our understanding of the issue, we would recommend checking the motor stator, part number PS10064559, to fix the issue. We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
1.) disconnect power to your washer. Turn off water supply and disconnect from the washer.
open the washer top and remove plastic cap from the wash plate
2.) using 7/16 socket, remove bolt from the wash plate. If you can't remove it with a socket , I recommend using impact wrench.
3.) remove wash plate
... Read more( you might need to spray penetrating oil or wd40 inside the bolt hole to loosen it. Check to make sure the wash plate gear grooves are not worn down, if they are, replace it.
4.) using your Maytag specific spaner nut wrench, remove the spaner nut from the shaft of the gear case. This should be right underneath where the wash plate was. If you can't turn it by hand , use a rubber mallet or hammer to encourage it.
5.) some people remove the wash basket at this point. I don't think it is necessary.
6.) close your washing machine. Tape the top closed to keep it from flying open. Tilt your washer back and prop it up where you have access to the underside of the washing machine.
7) remove motor rotor bolt and pull rotor off of the motor.
8.) disconnect the two wire connectors that supply power to motor. using a socket, remove bolts that are keeping motor attached to the gear case.
9.) Now that the gear case is all the is remaining on the underside, you can remove the 4 bolts that are holding the gear case to the washer. Now try to pull gear case out.
10.) if gearcase will not pull out, lower washer back to upright position. Spray penetrating oil or wd40 around the shaft of the gearcase and allow it to sit for 5-10 minutes. Using a hammer, lightly tap on the shaft of the gearcase and it should now fall out. ( you might have to apply penetrating oil again, or apply more force with the hammer.
11.) reinstall motor to new gearcase. Insert new gear case to the washer. Reinstall bolts and reconnect power supply wires.
12. ReInstall spaner nut inside the washer, reinstall wash plate.