Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WTW4910XQ3

WTW4910XQ3 Whirlpool Washer - Overview

Get Parts and Repair Help for WTW4910XQ3

If you know the washer repair part you need, you can browse the list of all parts on the WTW4910XQ3, or you can search by name or part description. You can also find your part by where it is located on the WTW4910XQ3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WTW4910XQ3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.11

Agitator Directional Cogs

These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.

Order within the next 8 hrs and your part ships today!
$18.89

Agitator Cam Kit

This kit included the cam, 4 dogs and bearing.

Order within the next 8 hrs and your part ships today!
$46.11

Lid Latch Assembly

The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the wa...

Order within the next 8 hrs and your part ships today!
$7.60

Seal, Inner Cap

Also known as an O-Ring. This black o-ring seal is three inches in diameter.

Order within the next 8 hrs and your part ships today!
$7.60

Agitator Cap Barrier with Seal

Order within the next 8 hrs and your part ships today!
$7.60

Spacer, Thrust

Sits in between the agitator base and upper agitator.

Order within the next 8 hrs and your part ships today!
$23.15

Drive Belt

The main drive belt is designed to ride on the pulley until the basket gets up to speed.

Order within the next 8 hrs and your part ships today!
$4.89

D-Shaped Knob Insert

This insert is sold individually. Knob not included. Knob is sold separately.

Order within the next 8 hrs and your part ships today!
$66.74

Water Inlet and Valve Assembly

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount o...

Order within the next 8 hrs and your part ships today!
$87.19

Agitator (Complete)

This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.

Order within the next 8 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

washer wouldn't agitate

  • Customer: mike from Kent, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 616 of 639 people found this instruction helpful
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing usin... read more

top half of agitator did not move during wash cycle

  • Customer: dennis from new stanton, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 201 of 227 people found this instruction helpful
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of old cogs remove and r... read more

Lid Lock light blinking, machine will not start

  • Customer: David from Los Alamos, NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 162 of 201 people found this instruction helpful
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not le... read more