WRS6W1EW7 Westinghouse Refrigerator - Instructions

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

Pulled out old drawer. Slid in new drawer.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

just installed new shelf

Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

Replaced them

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

It was so easy the light socket came right out took out old undid clips (light was melted to socket)put new socket piece in reattached clips...light works...as far as the door not closing...unscrewed on screw took off plastic clip put it in and put the hinge bearing on top...put refrigerator door back on...first top then squeeze bottom on...I bet I saved over $150.00 dollars if I called a repair man for a 15 minute job...your website made the job alot easier discribing what the problem was and parts need...easy to follow....thank you

I removed the top hinge cover, loosened the hinge so I could remove the door and laid the door on it's side. I removed what was left of the Door Closing Bearing and istalled the new parts. Set the bottom of the door on the lower hinge then postioned and set the top hinge into place and tightened the top hinge and installed the hinge cap.

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

Very very easy just slip replacement bins back into place. We did receive our order the very next day after ordering, so the parts ordered came very quickly... so thanks for that. Just hope these last longer than the originals did.

Ordered the replacement bin> It arrived the next day. Tool 3 seconds to pt it in place and all is back to normal. Good service.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I watched the step-by-step installation video and followed the instructions therein.

I ordered a freezer upper door bin and received the wrong part. I contacted PartsSelect immediately and they re-shipped the correct part. It was well packaged, I removed the part and paper towel wiped it down and snapped it into the freezer door bin. I highly recommend PartsSelect for their great products and Customer Service. I even add them to my contact numbers in my cell phone, they will be the first I call, when needing a part for any appliance!