WRS6W1EW5 Westinghouse Refrigerator - Instructions

Wiped down the new shelves; popped them in place; done in about 1 minute each. Delivery was as expected; watched progress of packages on the Fed Ex site. Delivered as promised.

The part was delivered the next day, but I had ordered the wrong part. I sent it back and they made it really easy to return it.

Just ordered a new door bin replacement and installed it.

got the new one replased it and it was easy plus im certified in majjor apliences

just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.

just follow the instructions.

husband did it took only a few min part was easy to find

take of the tray & take parts out & installed the new ones

Removed the nuts on top - to loosen the door. Lifted the door off the hinge. Took out old part, put in new one, reinserted door, replaced nuts.

I originally ordered the wrong part (for the freezer side). Received the part on Saturday--I had ordered on Thursday afternoon. Discovered my error and got on line to see how to return and ordered the correct part. This part came on Tuesday morning. I put the part on the door and was finished in no time! Great service and easy return for my wrong order. Thanks.

I am a 65 year old woman with no mechanical aptitude: I just unplugged the frig. And used a screw driver to pry of the plastic socket from its outside edge. . Then you just unplug two tiny contact plugs that appear when you pull out the socket and replug in those two the same way on the new part. Pop the socket back into the hole . . . . And screw in the new bulb. I knew I needed the socket part cause when the bulb burned out , a new bulb still did not work. . . If I can do it, anyone can!

Tested for power and found the thermal cut-off bad. Installed new one.

ice maker i received went in place of the old one with no problems or having to modify anything.Just loosened the two mounting screws and lifted out old one and new went in its place.very easy!

Shut the water off to the refrigerator. Loosened the two mounting bolts on the icemaker and lifted the old ice maker straight up. Unplugged the wire harness. The old ice maker had a 90 degree metal bracket mounted underneath the ice maker that rested on the wall of the freezer. I marked the bracket around the screw with a sharpie and removed the bracket and put it on the new ice maker in the same position that I marked. This bracket will keep the new ice maker level in the freezer. Plug in the harness on the new one. Slide it over the mounting bolts making sure the water through is in the icemaker and tightened the mounting bolts. Ice maker may take a while to cycle through, up to 24 hours, to start making ice. Done.

door bins just snap in , no tools needed. I was amazed at how fast they were delivered right to my home. thanks.