WRS6R3EW6 Westinghouse Refrigerator - Instructions

Watched the video and read some comments and from that it was easy

Pop out the old ones and put in the new ones. Super easy. Loved the Web Site, great pictures, and great speed of delivery. Will use you again

ordered the part, opened the package, put the part on. it fit perfectly, loaded it with stuff and closed the door. Perfectly perfect

I followed the website instructions, step by step. The web instructions were great. Easy to understand. Complete. Do yourself a favor.... just follow the instructions off the web! Great service! I am so happy to have found Part Select and will recommend to my friends.

The shelf slides into the slots in the door

Opened package, chose position of bin, placed in door. For the freezer, I had ordered the wrong bin, not realizing that the upper bins were different from the lower bins. PartSelect customer service representatives quickly resolved the problem and sent the correct bin, crediting my account when the original part was returned.

I needed one with the adapter. I installed it and there was ice in the tray the next morning...no problem

Drove pins all the way thru supports & then pryed support off. Tapped new supports in place. Watch the vidio on installing new supports. I probably wouldn't have been able to get the supports off without the trick I learned to just knock them on thru. Took all of 5 minutes to replace 4 supports.

Installed the shelves and the filter in less than 10 minutes

Parts came VERY quick and after a quick install my shelf is fixed and my water is back to normal.

1-Remove upper plate with phillips screw driver (6) screws 2- remove upper hinge plate with ratchet and socket (2) bolts 3- lift door off bottom cam, lay door flat on floor. 4- Remove broken cam on lower part of door, just pull out. 5- Install new cam in bottom of door 6- raise door up, set on cam, reinstall top bolts and screws 7- p. S. Make sure you trace top hinge location with a pencil before removal, so installation has proper location.

Unscrewed top part of door,put it down and replaced hinge bearing,apply some grease,put door back and done very easy do it yourself.

Slid it over the grooves and I was done. Took less than a minute!

I removed the top door hinge, and then lifted the door off the bottom hinge. The bushing which helps close the door was completely worn away. I pulled out the left-over bushing parts, installed the new bushing I had ordered fro you, and reinstalled the door. It works perfectly now.

Easily installed the two new shelf bins. I ordered the wrong ones to begin with and the return process was absolutely fantastic. They were very helpful.