WRS26MR4JW4 Crosley Refrigerator - Instructions

This was a simple repair, just pop the bins in the molded spots. I would like to comment that the bins are flimsy and this is the second time I have had to replace them in less than 4 years. They break very easily so do not overload them.

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

Very very easy just slip replacement bins back into place. We did receive our order the very next day after ordering, so the parts ordered came very quickly... so thanks for that. Just hope these last longer than the originals did.

I followed the instructions on the Video and it was very helpful and I completed the job in 15 minutes. Greatest web site for helping with repairs. I would certainly reccommend this web site to anyone that would perform their own repairs

Easily installed the new ice-maker. Rec'd the part in three days.

Ordered the replacement bin> It arrived the next day. Tool 3 seconds to pt it in place and all is back to normal. Good service.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I watched the step-by-step installation video and followed the instructions therein.

I ordered a freezer upper door bin and received the wrong part. I contacted PartsSelect immediately and they re-shipped the correct part. It was well packaged, I removed the part and paper towel wiped it down and snapped it into the freezer door bin. I highly recommend PartsSelect for their great products and Customer Service. I even add them to my contact numbers in my cell phone, they will be the first I call, when needing a part for any appliance!

I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

I was unsure how I was going to be able to make this repair. However, it was so easy I have planned to order other items to make the repairs myself. I am a rental manager at a condominium complex and I think my homeowners will be very happy when they see how much money we can save them by our office doing the repairs.

I removed the cover on the door to access the levers that dispensed the water and ice. I was able to pull the assembly out far enough to remove the damaged part and install the new one. It was fairly easy because i have small hands and did not need to pull the assembly out too far. Otherwise it went fairly smooth and was done in no time. The fact that I am a woman had no bearing other than the small hands part. My husband could not have changed the part for that reason. The ease in changing the part saved us quite a bit of money by not having to call a repairman. the only authorized repairman is about 40 miles away and with mileage plus installation it would have cost a fortune and being on a fixed income ease of part installation is great for us older people. thanks for great product.

Replaced all broken pieces quickly for very cheap! Website very easy to use!!!

Followed video instruction provided on this site.

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....