WRS26MR4JW1 Crosley Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old one broke
I watched the step by step video. I t was a breeze. Thanks for the fast service and number 1 video to show me how to install
Parts Used:
-
Jacob from Dawson Springs, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water dripped from water dispenser after use
Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.
Parts Used:
-
Jeffrey from Greenfield, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Three of the four drawer supports were broken
It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.
Parts Used:
-
Linda from Turtle Creek, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bottom door bin broke
A part replacement. I was extremely happy to find the somewhat obscure part at Parts Select and at a very reasonable price. The part arrived in three days and fit perfectly. Very satisfied!!!
Parts Used:
-
John from Cape Coral, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bins had been broken for a while and taped to work.
Replaced old bins with new .Fit like a glove and seemed to be of better material. Delivered with-in a couple of days. Thanks
Parts Used:
-
DERRILL from WEST PALM BEACH, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
head a busted door bin from kids climbing on when small
not much to putting a bin in just insure it is in clips correct and your done.what I was amazed with was the ease of getting correct cut sheet to order part and no drawn out 2 page forms to become a member and it arrived ups which is not always easy in alaska and was on my door step when we got back from a week trip out snowmachining. this was the most accurate and easiest part I have ever ordered, and I work on the supervision end of construction and spend so much wasted time ordering over the internet when I have to
Parts Used:
-
bears from palmer, AK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replace bearings in door
Had one other person, so putting the door back was easier. Repair went as told. Could do it myself.
Parts Used:
-
Lynn from Brunswick, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Ordered wrong part
I ordered a extra bin for the door. I ordered the wrong one the top bin and the bottom two are made different. I didn't notice that. The person I talked to was very kind and helpful. Also I have never received a product as fast as from this company. Great service. Thank you.
Parts Used:
-
Sharon from Edmond, OK
-
Difficulty Level:Very Difficult
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper support broke
Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.
Parts Used:
-
Diana from Clearwater, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
draw was dropping out of track
We just followed the drawing on the computer to order the part and to help us take apart and fix the problem. It was very easy (especially if it's not an electrical part). I would say just about anyone could do this and save a lot of money in repairs.
Parts Used:
-
rosemary from toms river, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Plastic Front Ice Container Broke And Crisper Pan Plaster Front Broke
Remove and replace broke items. Crisper pan was the easy, just take the old one out and put the new one in. , The slider on the crisper was easy, just pop it out and reinstall. The front ice container was unscrew the screws and remove and replace old with the new. And insert the screw back in. Of course common sense tells you to dump the ice out of the ice containter first. Make sure everything lines up
Parts Used:
-
GENE from SHREVEPORT, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken shelf
-
James from Layton, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Ice container and auger came apart after 13 years of daily use.
I simply pulled out the ice container and auger assembly and,after washing the new one, Iput the new one in and it worked immediately. It couldn't have been any simpler.
Parts Used:
-
Peggy from Locust, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rattling Noise from behind frig
Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.
Parts Used:
-
Michael from Rockford, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped working
Realized Ice Maker was not getting water during it's cycle and suspected water valve based on other posts to this web site. My fridge is 9 years old and the tubes connecting the valve were plastic screw on type. The new valve did not have threads to accept the nuts. Turns out all I had to do was cut the nuts off and insert the water tubes into the valve which auto-locked the tubes to the valve. Ice maker now works great.
Parts Used:
-
Charles from Fishkill, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!