WRS26MR4JS6 Crosley Refrigerator - Instructions

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

Ordered the new part. The pictures online were most helpful. Just compare the old part to the picture, place the order, wait two days, receive the package, open it and slide the new part in place. Very easy.

just insert the new crisper 1-2-3 done!

took old out putnew in cleaned old glass with windex

electrical unplugged. water turned off and disconnected. cardborad backing off (4 screws). removed part (2 screws). unplugged electrical connections. removed each line one at a time and inserted into new part, connected electrical connections. placed new part with all connections back onto refrigerator, (2 screws), backing back on, water line connected, and electrical connected. no leaks with new part. simple uninstall and install for do-it-yourselfer. instructions need to be printed in larger font for easier reading.

Repair went well, I ordered two part only need to use the front board.

The ordering was a breeze! The part arrived within 3 days! And it fit perfectly within 30 seconds of getting it out of the box!thanks for a great service experience.

Unplugged frig. removed old switch with the aid of screw driver. removed wires and taped; plugged frig. back in and waited for new one. new one came, unplugged frig.removed tape from wire clips plugged in to switch and pushed switch into socket hole and plugged frig. back in; shut door, works like a new one.

Took the parts out of the box and snapped them in place, package un wrap time and install time 7 minutes or less. Simple way easy! Aaa plus cust service, thanks ruben~vic & di

snapped in the new bin

Turned off water to refrigerator and unscrewed canister, removed filter reinstalled canister and ran water thru to get all sludge from line. Turn water back off. Remove canister and install filter reinstalled canister, turned water back on. Run water thru line. Job complete. No problems.

I tapped in the peg like it showed in video and pried out with flat screw driver and hammered other peg in flush with part

unplugged frig, removed shelves & inner lower back panel in freezer side, removed defrost thermostat from tube, cut the wires and spliced in new stat wires with provided wire splices crimped together and replaced thermostat on tube it has been a week and no ice so far??. this was after 2 trips by the repairman who replace the defrost timer board which was most likely good at a total of $160!!! still cheaper than $1000 for a new frig!!!!!!!!!!!!!!

Pooped the old one out and pooped the new one in.Item was in stock, very fast delivery.