All Installation Instructions for Crosley Refrigerator WRS26MR4JS5

Ice door flapper broke in half

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

Parts Used:

Ice Chute Door

James from Atlantic, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

water leak

two screws fingers pop the hoses off done in 4 minutes

Parts Used:

Water Filter Housing - Does NOT Include Elbow Connectors

Forrest from Gulfport, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

The ice crusher housing is made of plastic and a piece of it broke off,

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

Parts Used:

Dispenser Crusher Housing

JAMES from COOSADA, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

hook broke

just installed new shelf

Parts Used:

Door Shelf

Larry from Lincoln, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Broken shelf in the door

Replaced them

Parts Used:

Refrigerator Door Bin

Eugene from Holland, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Missing parts

All the bins snapped right in. Bolts for hinge fit and went right in. Kick plate snapped right in easy. Every thing easy to do. Will use these people again if we need to. Great parts and no problems.

Parts Used:

Hexagonal Screw

Kickplate Grille

Pan Head Screw

Upper Hinge Cover

Cynthia from Castroville, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

Was this instruction helpful to you?

Thank you for voting!

Water dripped from water dispenser after use

Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.

Parts Used: