WRS26MF8JS1 Crosley Refrigerator - Instructions

Used a nut driver to remove the small panal from the back of the refrigerator. Removed the two screws holding the valve in place. Unscrewed the water lines from the old valve and cut the ends off of them. Push the water lines back into the new valve. Unpluged the wiring from the old valve and installed them in the new valve. reinstalled the new valve and put the cover back on. Tested system for proper operation.

Replaced the ribbon from circuit board in door to the circuit board which controls the water and ice dispenser and back light. Unplug the refrigerator before any repair is attempted. You can short the boards when replacing the cable. Remove the front plate where the buttons are. Be careful, it slides up then out. once you remove the outer panel, you will see the ribbon which attaches to the front panel to the circuit board in the door (of course freezer side). on the plate you just removed, there is a white cover plate secured with four small philip head screws. Don't try to replace the ribbon without removing this cover. If you do, you run the risk of breaking the the ribbon and then you'll have to order another one. Make sure you note which way the cable is inserted. Insert the cable in both slots on the door and panel. Replace the screws and front panel.

Slid bin into door

i dissasamble the water & ice dispenser and substitued the ribbon cable for the new one.

Removed and replaced the water valve-it was a very easy repair.

Crusher housing had broken so I ordered the part and replaced it. I have since put it back together twice. When I first installed it it crushed the ice no problem. From that point on it seems to lock up and won't crush the ice, cube ice works but the blades seems to hang up after the first use. I can turn the cog by hand but I have to turn it backwards a few times before it turns freely, however it still won't crush the ice. I took it apart and put it back together again. Same thing happened after the first time I tried it. Can you help me. The old crusher broke into. Could something else be locking up?Thanks for the help

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

By removing the old water filter and installing the new one

just pull out broken crisper, and push in new crisper drawer.

The dirt drawer I received got broke during shipping but was quickly replaced, thank you :)

Installed new bin door. Took about a minute. Was good being able to get the part online. Received in a couple of days. Packaged nicely to prevent damage.

I was amazed and so pleased at how easy it was to find and order the product I needed to solve my problem with a broke bin on my refrigerator door. The shipment of the part also came amazingly fast. Thank you for your product and service!!!!!

I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises

Took all food out of the refrigerator door. Pulled the door off by unscrewing the 3/8 hex-head screws on top and bottom hinges. The door is relatively light and removes very easy. Unscrewed and removed the broken plastic cam pieces and replaced with the new ones. Replaced the steel hinge, even though it was still in good shape. The hinge kit comes with left and right hinges as well as a spare cam insert with each hinge, so I still have all the left side parts and spare cam insert for the right side for a future fix if needed. The repair itself was extremely easy and took about 10 minutes; the total time that included emptying the food, cleaning the bottom grill plate and replacing the food was about 20 minutes of my evening.

The bin was a perfect fit. It just slid into the groove.