WRS26MF6JM1 Crosley Refrigerator - Instructions

after I contacted Frigidaire and they told me that it was the vent fan and told me where it was, looked up the part and got a new one from Part Select. When it arrived I unplugged the old one and plugged in the new one and reattached the holding bracket. No tools required. I then turned on the dishwasher and it works perfectly. If you get an "ou" error message on your Frigidaire Dishwasher, the money you will save is great!!!!

I should have ordered start kit instead of start capacitor. The start cap astir did not fix problem so I ordered kit. Compasator comes as part of kit. Followed enclosed instructions. Cut existing wires and reconnected new wiring. Simple as that. It's a plug in item. Now worried it may be working to good. Freezer down to 10 deg. Watching to see if compressor is running to long. Seems ok lol. Wife hates me now. She wanted new frige.

The instruction page was not terribly clear, so I made my own diagram. A nut driver is used to disattach the existing panel, both in front and on the side as it extends to the back. Once you get that off, there are wires everywhere. Pay close attention to where the wires come from. I drew a rough picture of where the wires connected (by color), so I would know where to plug the new part in. You have to get the entire old part out before you can start attaching the new. Once all the wires are plugged into the correct place, it goes together fairly quickly.