WRS26MF5AW3 Westinghouse Refrigerator - Instructions

Just set the new shelf over the clips on the door. VERY easy.

followed the video and had little or no trouble loosening or tightening bolts or phillips head screws. The only difficulty was removing the spacer on the door itself. Otherwise a piece of cake. Good video and easy to follow instructions.

Turned off the refrigerator, removed the bottom drawer from refrigerator, then removed the glider bars for the drawer on the left side where the filter chamber is. Removed the filter and then removed the plastic peace guarding the filter chamber. Once that was all removed we removed the screws holding the filter base in place. Now that everything was exposed we removed the inlet and outlet lines from the filter base by pushing in the nobs inside the base and pulling the lines out with some slight elbow grease. After that we just proceeded in reverse. We plugged the filter in after the base was secure to make sure that the fix worked. The repair worked like a charm, was relatively simple and now our fridge is all better with water and ice without a large repair bill :o)

Replaced

The repair was very easy, just a matter of snapping the bin on the door. However, i was very please and impressed with the expeditious service that i received. I ordered the door around noon and it was delivered by 10am the next day. This is what i consider "quality service" and I thank this company sincerely.

just snapped part unto door.

Ordered and received new shelf. Replacement took about one minute.

Had them in a couple of days. Very impressive. I've recommended this site to many friends.

Watched the Parts Select video associated with this part. Very easy repair. Removed the right-hand door, removed the broken hinge, popped in the new part, applied some lubrication and put the door back on. Lengthiest part was removing food items from the door in preparation for the job. Highly recommend watching the video first as it shows you exactly what to do and how easy this job is.

take of the tray & take parts out & installed the new ones

Removed the nuts on top - to loosen the door. Lifted the door off the hinge. Took out old part, put in new one, reinserted door, replaced nuts.

Popped the old water filter out and popped the new one in, just as easy as that!!

I originally ordered the wrong part (for the freezer side). Received the part on Saturday--I had ordered on Thursday afternoon. Discovered my error and got on line to see how to return and ordered the correct part. This part came on Tuesday morning. I put the part on the door and was finished in no time! Great service and easy return for my wrong order. Thanks.

Pulled the old filter out and pushed the new filter in.

first turn power off (i just tripped breaker but you can unplug unit. Next remove water and ice base tray this piece simply slides straight out. Now remove the control panel bezel by first removing 3 #2 philps head screw along base of bezel, unplug bezel/control panel from actuator by removing 12pin connector set control panel/bezel aside for now. next remove 3 screw securing ice and water dispenser, remove 4pin electrical connector on lower left side. now aqloow unit to hang by water supply tube . rotate unit so that you have a top view. visually locate and remove the two metal keeper that hold the dispenser actuator in place again there are 3 philips head screws holding these tabs down 2 on one tab and one on the other remove and discard old/broken tab. install new actuator and reverse the removal process and your done the whole job takes about 15-20 miniutes unless you have to repair any rusty area that can form around face of refrigerator face where bezel mounts.