WRS23MW3AQ1 Westinghouse Refrigerator - Instructions

loosened two 1/4 in. screws removed ice maker unplugged harness. Plugged back in slid the replacement ice maker over the two screws secured. Done

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

The repair was extremely simple. First i unplugged the fridge and removed everything from the door. I unscrewed the plastic cap on top of the fridge door hinge to expose the hinge. Then i unbolted the hinge it helps to have someonehold the door so it doesn't fall. After laying the door down I removed the rest of the broken hinge bearing inserted the new one and reinstlled the door making sure it was lined up evenly from top to bottom to the freezer door. The only thing that was annoying was i had to remove the metal plate at the bottom of the door to get to the broke off hinge bearing and those srews were square head screws not phillips head like the one on top of the door.

I thought this was going to be such a chore to find this part, but it wasn't. I went to partselect.com, found the piece I needed, paid for it and was done in 10 minutes. Partselect.com made searching for the piece I needed incredibly easy to find and order. I received the part on time an put the bin in place in five seconds. I will always go back to partselect.com to find my products.

Repair was very simple and fast, only needed a phillips screw driver.

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

Replaced ice maker - easy to replace but it did not fix the problem.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

Had a little trouble getting old pin out of support bracket finally used screwdriver and broke plastic so I could get to the pin and used needle nose pliers to remove hanger then came right out putting new one in was a snap slid in tapped pin in and installed new crisper bracket took about 15to 20 minutes to complete.Contribute difficulty in removing pin to age of refrigerator had been in place for at least 5 years maybe longer overall experience not bad.I am 75 would probably been easier for a younger man more flexible.

first replaced dual solenoid, then ice maker. still not working. going to chase electrical next

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

Had one other person, so putting the door back was easier. Repair went as told. Could do it myself.

Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.