WRS23MF5AS5 Westinghouse Refrigerator - Instructions

I followed the website instructions, step by step. The web instructions were great. Easy to understand. Complete. Do yourself a favor.... just follow the instructions off the web! Great service! I am so happy to have found Part Select and will recommend to my friends.

Ordered the part from PartSelect. Estimated time for slow delivery seven days. I got it in three. Removed the cover from the water and ice maker dispenser arena held on by three screes. I had to use an easy out on one rusted scree. Disconnected the wiring to the switches and lat the Circuit Board come forward by removing three small screws. Using tweezers to catch the screws, I removed two small screws holding the broken actuator and put the new one in its place making sure the spring was properly located and the ice maker swivel was under the hold-down strip along with the new actuator. I reassembled the door cover and got a drink of cold water. By the way, always unplug the refrigerator because that area is hot. Dr Robert E McGinnis author of In Search Of Paradise and many other fine books found on Amazon.

Simply removed two screws from top hinge and lifted door off bottom hinge. Next leaned door over and removed broken portion of bearing. Finally reinstalled door and works like a charm. Thanks too this site painless repair. Oh ya part is a perfect fit.


Thanks Clay


P.S. Would recommend to a friend. Note shipping WOW. Please consider using US Mail. Shipping more than part. OUCH.

Watched the video and read some comments and from that it was easy

I needed one with the adapter. I installed it and there was ice in the tray the next morning...no problem

Drove pins all the way thru supports & then pryed support off. Tapped new supports in place. Watch the vidio on installing new supports. I probably wouldn't have been able to get the supports off without the trick I learned to just knock them on thru. Took all of 5 minutes to replace 4 supports.

Replacement took about 10 seconds, just put it onto the holding brackets, pressed down and presto...DONE!

Purchased 2 parts on line, easy replacement, one man job, 4 nuts to remove and replace. 20 minutes

I watched the video and did the same thing on mine and now it is working fine

put in a new one

It snapped in place.

ordered the part, watched the video....it was a snap

I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.

Removed cover from top bracket with phillips sd. removed bracket with socket wrench; lifted door from hinge; removed remnants of old hinge from recess, this took a while because it had broken inside, eventually I used needle nose pliers to break it up and pull it out in three parts; installed new bearing hinge; reset door, and installed bracket and cover.

Easy!

Loved the website. Easily found the part I needed. Filter received in two business days. Wow, really fast service. Replacing water filter was a piece of cake. Pulled out old filter, removed caps from new one and slid it into place. Will certainly look to this company for parts in the future.