Models > WOC54EC7HB21 > Instructions

WOC54EC7HB21 Whirlpool Microwave Oven Combo - Instructions

All Instructions for the WOC54EC7HB21
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace spindle on turning table
exact part in with the new out with the old
Parts Used:
RING-TURN
  • jeff from las vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The light in our microwave was out.
We had to remove screws from the vent covers above and below the microwave, then there were 2 screws (one on each side) that attached the microwave to the oven. Once all of the screws were removed we had to pull the microwave out. Then we pulled the light cord out, removed the burnt out light and installed the new one. Then reversed the steps.
Parts Used:
LENS-LAMP
  • Michael from Ladson, SC
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WOC54EC7HB21
1 - 2 of 2
Back to Top