Models > WHDRR418G1WW > Parts

WHDRR418G1WW General Electric Washer - Parts

All parts for the General Electric Washer WHDRR418G1WW

Below is a list of all parts for the General Electric Washer WHDRR418G1WW. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WHDRR418G1WW
15-28 of 121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Tub Bearing


Agitator Coupling

Bolt not included. This part connects the transmission drive shaft to the agitator base.


Hub Washer


Lid Switch with Wire Harness

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.


Fabric Softener Dispenser


Water Pressure Switch Hose


D-Shaped Knob Clip

Sold individually.


Socket Rod Support - White



The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.


Triple Water Inlet Valve

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.


Leveling Leg

Sold Individually.


Shaft and Mode Shifter Assembly

Also known as the gearcase or transmission. This part helps move the agitator back and forth during the wash cycle.



This cover goes on top of the balance ring that is located on top of the basket.


Rod and Spring Assembly - Green

This part helps center and support the drum, transmission and motor assembly.

All Parts for the WHDRR418G1WW
15-28 of 121